checkCIF/PLATON report (basic structural check)

No syntax errors found.                               CIF dictionary
Please wait while processing ....                     Interpreting this report

Datablock: s92

Bond precision: C-C = 0.0075 A Wavelength=0.71073

`Cell:`	`a=5.9385(8)`	`b=13.0338(19)`	`c=10.4518(16)`
	`alpha=90`	`beta=104.583(6)`	`gamma=90`
`Temperature:`	`120 K`

	`Calculated`	`Reported`
`Volume`	`782.9(2)`	`782.9(2)`
`Space group`	`P 21`	`P2(1)`
`Hall group`	`P 2yb`	`P 2yb`
`Moiety formula`	`C17 H21 N O3`	`C17 H21 N O3`
`Sum formula`	`C17 H21 N O3`	`C17 H21 N O3`
`Mr`	`287.35`	`287.35`
`Dx,g cm-3`	`1.219`	`1.219`
`Z`	`2`	`2`
`Mu (mm-1)`	`0.083`	`0.083`
`F000`	`308.0`	`308.0`
`F000'`	`308.14`
`h,k,lmax`	`7,16,13`	`7,15,13`
`Nref`	`1845[ 3533]`	`1489`
`Tmin,Tmax`	`0.994,0.999`	`0.990,0.999`
`Tmin'`	`0.990`

Correction method= MULTI-SCAN

Data completeness= 0.81/0.42 Theta(max)= 27.300

R(reflections)= 0.0735( 1232) wR2(reflections)= 0.1968( 1489)

S = 1.131 Npar= 194

The following ALERTS were generated. Each ALERT has the format
       test-name_ALERT_alert-type_alert-level.
Click on the hyperlinks for more details of the test.
Alert level A
REFLT03_ALERT_1_A  Reflection count < 85% complete (theta max?)
           From the CIF: _diffrn_reflns_theta_max           27.30
           From the CIF: _diffrn_reflns_theta_full          27.30
           From the CIF: _reflns_number_total               1489
           TEST2: Reflns within _diffrn_reflns_theta_max
           Count of symmetry unique reflns         1845
           Completeness (_total/calc)             80.70%
PLAT022_ALERT_3_A Ratio Unique / Expected Reflections too Low ....       0.81      
PLAT029_ALERT_3_A _diffrn_measured_fraction_theta_full Low .......       0.81      
Alert level C
PLAT089_ALERT_3_C Poor Data / Parameter Ratio (Zmax .LT. 18) .....       7.68      
PLAT340_ALERT_3_C Low Bond Precision on  C-C Bonds (x 1000) Ang ..          8      
Alert level G
REFLT03_ALERT_4_G Please check that the estimate of the number of Friedel pairs is
            correct. If it is not, please give the correct count in the
            _publ_section_exptl_refinement section of the submitted CIF.
           From the CIF: _diffrn_reflns_theta_max           27.30
           From the CIF: _reflns_number_total               1489
           Count of symmetry unique reflns         1845
           Completeness (_total/calc)             80.70%
           TEST3: Check Friedels for noncentro structure
           Estimate of Friedel pairs measured         0
           Fraction of Friedel pairs measured     0.000
           Are heavy atom types Z>Si present         no
PLAT791_ALERT_4_G The Model has Chirality at C2      (Verify) ....          R      
PLAT791_ALERT_4_G The Model has Chirality at C4      (Verify) ....          S      
   3 ALERT level A = In general: serious problem
   0 ALERT level B = Potentially serious problem
   2 ALERT level C = Check and explain
   3 ALERT level G = General alerts; check

   1 ALERT type 1 CIF construction/syntax error, inconsistent or missing data
   0 ALERT type 2 Indicator that the structure model may be wrong or deficient
   4 ALERT type 3 Indicator that the structure quality may be low
   3 ALERT type 4 Improvement, methodology, query or suggestion
   0 ALERT type 5 Informative message, check

Publication of your CIF in IUCr journals

A basic structural check has been run on your CIF. These basic checks will be run on all CIFs submitted for publication in IUCr journals (Acta Crystallographica, Journal of Applied Crystallography, Journal of Synchrotron Radiation); however, if you intend to submit to Acta Crystallographica Section C or E, you should make sure that full publication checks are run on the final version of your CIF prior to submission.

Publication of your CIF in other journals

Please refer to the Notes for Authors of the relevant journal for any special instructions relating to CIF submission.

PLATON version of 13/08/2009; check.def file version of 12/08/2009

Datablock s92 - ellipsoid plot

Download CIF editor (publCIF) from the IUCr
Download CIF editor (enCIFer) from the CCDC
Test a new CIF entry