checkCIF/PLATON report (basic structural check)
No syntax errors found. CIF dictionary
Please wait while processing .... Interpreting this report
Datablock: s92
Bond precision: |
C-C = 0.0285 A |
Wavelength=0.71069 |
Cell: |
a=10.54(2) |
b=11.21(2) |
c=16.580(4) |
|
alpha=74.90(5) |
beta=77.50(7) |
gamma=72.15(5) |
Temperature: |
293 K |
|
|
|
Calculated |
Reported |
Volume |
1780(5)
|
1780(5) |
Space group |
P -1 |
P-1 |
Hall group |
-P 1 |
? |
Moiety formula |
C21 H15 I3 Mo O3 P, C9 H7 N, C Cl2
|
?
|
Sum formula |
C31 H22 Cl2 I3 Mo N O3 P
|
C31 H22 Cl2 I3 Mo N O3 P
|
Mr |
1035.01 |
1035.01
|
Dx,g cm-3 |
1.931 |
1.931
|
Z |
2 |
2
|
Mu (mm-1) |
3.196 |
3.196
|
F000 |
978.0 |
978.0 |
F000' |
972.81
|
|
h,k,lmax |
12,13,19 |
10,12,19 |
Nref |
6097 |
3518 |
Tmin,Tmax |
0.590,0.639 |
|
Tmin' |
0.460 |
|
Correction method= Not given |
|
Data completeness= 0.577 |
Theta(max)= 24.720 |
R(reflections)= 0.0562( 2345) |
wR2(reflections)= 0.1445( 3515) |
The following ALERTS were generated. Each ALERT has the format
test-name_ALERT_alert-type_alert-level.
Click on the hyperlinks for more details of the test.
Alert level A
REFLT03_ALERT_3_A Reflection count < 85% complete (theta max?)
From the CIF: _diffrn_reflns_theta_max 24.72
From the CIF: _reflns_number_total 3518
TEST2: Reflns within _diffrn_reflns_theta_max
Count of symmetry unique reflns 6097
Completeness (_total/calc) 57.70%
PLAT022_ALERT_3_A Ratio Unique / Expected Reflections too Low .... 0.58
PLAT027_ALERT_3_A _diffrn_reflns_theta_full (too) Low ............ 0.00 Deg.
PLAT029_ALERT_3_A _diffrn_measured_fraction_theta_full Low ....... 0.00
PLAT052_ALERT_1_A (Proper) Absorption Correction Method Missing .. ?
Alert level B
PLAT148_ALERT_3_B su on the a - Axis is Too Large (x 1000) . 21 Ang.
PLAT148_ALERT_3_B su on the b - Axis is Too Large (x 1000) . 24 Ang.
PLAT149_ALERT_3_B su on the beta Angle is Too Large (x 100) .. 7 Deg.
PLAT342_ALERT_3_B Low Bond Precision on C-C Bonds (x 1000) Ang .. 28
Alert level C
REFNR01_ALERT_3_C Ratio of reflections to parameters is < 10 for a
centrosymmetric structure
sine(theta)/lambda 0.5884
Proportion of unique data used 0.9991
Ratio reflections to parameters 9.2744
THETM01_ALERT_3_C The value of sine(theta_max)/wavelength is less than 0.590
Calculated sin(theta_max)/wavelength = 0.5884
WEIGH01_ALERT_1_C Extra text has been found in the
_refine_ls_weighting_scheme field. This should be in the
_refine_ls_weighting_details field.
Weighting scheme given as calc w=1/[\s^2^(Fo^2^)+(0.0744P)^2^+0.0000
Weighting scheme identified as calc
PLAT088_ALERT_3_C Poor Data / Parameter Ratio .................... 9.27
PLAT094_ALERT_2_C Ratio of Maximum / Minimum Residual Density .... 2.31
PLAT220_ALERT_2_C Large Non-Solvent C Ueq(max)/Ueq(min) ... 3.27 Ratio
PLAT230_ALERT_2_C Hirshfeld Test Diff for C8 -- C9 .. 5.31 su
PLAT241_ALERT_2_C Check High Ueq as Compared to Neighbors for C8
PLAT241_ALERT_2_C Check High Ueq as Compared to Neighbors for C12
PLAT241_ALERT_2_C Check High Ueq as Compared to Neighbors for C15
PLAT241_ALERT_2_C Check High Ueq as Compared to Neighbors for C28
PLAT166_ALERT_4_C S.U's Given on Coordinates for calc-flagged .... H5
PLAT166_ALERT_4_C S.U's Given on Coordinates for calc-flagged .... H6
PLAT166_ALERT_4_C S.U's Given on Coordinates for calc-flagged .... H7
PLAT166_ALERT_4_C S.U's Given on Coordinates for calc-flagged .... H8
PLAT166_ALERT_4_C S.U's Given on Coordinates for calc-flagged .... H9
PLAT166_ALERT_4_C S.U's Given on Coordinates for calc-flagged .... H11
PLAT166_ALERT_4_C S.U's Given on Coordinates for calc-flagged .... H12
PLAT166_ALERT_4_C S.U's Given on Coordinates for calc-flagged .... H13
PLAT166_ALERT_4_C S.U's Given on Coordinates for calc-flagged .... H14
PLAT166_ALERT_4_C S.U's Given on Coordinates for calc-flagged .... H15
PLAT166_ALERT_4_C S.U's Given on Coordinates for calc-flagged .... H17
PLAT166_ALERT_4_C S.U's Given on Coordinates for calc-flagged .... H18
PLAT166_ALERT_4_C S.U's Given on Coordinates for calc-flagged .... H19
PLAT166_ALERT_4_C S.U's Given on Coordinates for calc-flagged .... H20
PLAT166_ALERT_4_C S.U's Given on Coordinates for calc-flagged .... H21
PLAT166_ALERT_4_C S.U's Given on Coordinates for calc-flagged .... H22
PLAT166_ALERT_4_C S.U's Given on Coordinates for calc-flagged .... H23
PLAT166_ALERT_4_C S.U's Given on Coordinates for calc-flagged .... H24
PLAT166_ALERT_4_C S.U's Given on Coordinates for calc-flagged .... H26
PLAT166_ALERT_4_C S.U's Given on Coordinates for calc-flagged .... H27
PLAT166_ALERT_4_C S.U's Given on Coordinates for calc-flagged .... H28
PLAT166_ALERT_4_C S.U's Given on Coordinates for calc-flagged .... H29
PLAT194_ALERT_1_C Missing _cell_measurement_reflns_used datum .... ?
PLAT195_ALERT_1_C Missing _cell_measurement_theta_max datum .... ?
PLAT196_ALERT_1_C Missing _cell_measurement_theta_min datum .... ?
PLAT234_ALERT_4_C Large Hirshfeld Difference N1 -- C30 .. 0.20 Ang.
PLAT244_ALERT_4_C Low 'Solvent' Ueq as Compared to Neighbors of C31
PLAT731_ALERT_1_C Bond Calc 2.908(6), Rep 2.908(2) ...... 3.00 su-Ra
MO1 -I3 1.555 1.555
PLAT790_ALERT_4_C Centre of Gravity not Within Unit Cell: Resd. # 1
C21 H15 I3 Mo O3 P
PLAT790_ALERT_4_C Centre of Gravity not Within Unit Cell: Resd. # 3
C Cl2
PLAT950_ALERT_1_C Reported and Calculated Hmax Values Differ by .. 2
Alert level G
GOODF01_ALERT_1_G _refine_ls_goodness_of_fit_obs is an old dataname which has
been superceded by _refine_ls_goodness_of_fit_ref
REFLE01_ALERT_1_G _reflns_observed_criterion is an old dataname which has been
superceded by _reflns_threshold_expression
REFLG01_ALERT_1_G _reflns_number_observed is an old dataname which has been
superceded by _reflns_number_gt
REFLT03_ALERT_1_G ALERT: Expected hkl max differ from CIF values
From the CIF: _diffrn_reflns_theta_max 24.72
From the CIF: _reflns_number_total 3518
From the CIF: _diffrn_reflns_limit_ max hkl 10. 11. 19.
From the CIF: _diffrn_reflns_limit_ min hkl -10. -12. -19.
TEST1: Expected hkl limits for theta max
Calculated maximum hkl 12. 13. 19.
Calculated minimum hkl -12. -13. -19.
RFACG01_ALERT_3_G _refine_ls_R_factor_obs is an old dataname which has been
superceded by _refine_ls_R_factor_gt
RFACR01_ALERT_3_G _refine_ls_wR_factor_obs is an old dataname which has been
superceded by _refine_ls_wR_factor_ref
SHFSU01_ALERT_2_G _refine_ls_shift/esd_max is an old dataname which has been
superceded by _refine_ls_shift/su_max
PLAT333_ALERT_2_G Check Large Av C6-Ring C-C Dist. C25 -C30 1.42 Ang.
PLAT335_ALERT_2_G Check Large C6 Ring C-C Range C25 -C30 0.20 Ang.
PLAT344_ALERT_2_G Check sp? Angle Range in Solvent/Ion for ... C31
PLAT164_ALERT_4_G Nr. of Refined C-H H-Atoms in Heavy-Atom Struct. 22
PLAT180_ALERT_4_G Check Cell Rounding: # of Values Ending with 0 = 3
PLAT199_ALERT_1_G Check the Reported _cell_measurement_temperature 293 K
PLAT200_ALERT_1_G Check the Reported _diffrn_ambient_temperature 293 K
PLAT808_ALERT_5_G No Parsable SHELXL style Weighting Scheme Found !
5 ALERT level A = In general: serious problem
4 ALERT level B = Potentially serious problem
42 ALERT level C = Check and explain
15 ALERT level G = General alerts; check
13 ALERT type 1 CIF construction/syntax error, inconsistent or missing data
11 ALERT type 2 Indicator that the structure model may be wrong or deficient
13 ALERT type 3 Indicator that the structure quality may be low
28 ALERT type 4 Improvement, methodology, query or suggestion
1 ALERT type 5 Informative message, check
Publication of your CIF in IUCr journals
A basic structural check has been run on your CIF.
These basic checks will be run on all CIFs submitted for publication in
IUCr journals (Acta Crystallographica, Journal of Applied Crystallography,
Journal of Synchrotron Radiation); however, if you intend to submit to Acta
Crystallographica Section C or E, you should make sure that
full publication
checks are run on the final version of your CIF prior to submission.
Publication of your CIF in other journals
Please refer to the Notes for Authors of the relevant journal for any special instructions relating to CIF submission.
PLATON version of 13/08/2009; check.def file version of 12/08/2009
Datablock s92 - ellipsoid plot |
|
Download CIF editor (publCIF) from the IUCr
Download CIF editor (enCIFer) from the CCDC
Test a new CIF entry
|