checkCIF/PLATON report (basic structural check)

No syntax errors found.                               CIF dictionary
Please wait while processing ....                     Interpreting this report

Datablock: solution

Bond precision: C-C = 0.0050 A Wavelength=0.71069

`Cell:`	`a=8.910(6)`	`b=27.07(3)`	`c=5.947(7)`
	`alpha=90`	`beta=101.01(16)`	`gamma=90`
`Temperature:`	`150 K`

	`Calculated`	`Reported`
`Volume`	`1408(3)`	`1408(2)`
`Space group`	`P 21/c`	`P2(1)/c`
`Hall group`	`-P 2ybc`	`-P 2ybc`
`Moiety formula`	`C14 H24 O4`	`C14 H24 O4`
`Sum formula`	`C14 H24 O4`	`C14 H24 O4`
`Mr`	`256.33`	`256.33`
`Dx,g cm-3`	`1.209`	`1.209`
`Z`	`4`	`4`
`Mu (mm-1)`	`0.087`	`0.087`
`F000`	`560.0`	`560.0`
`F000'`	`560.30`
`h,k,lmax`	`10,32,7`	`9,31,6`
`Nref`	`2474`	`2043`
`Tmin,Tmax`	`0.983,0.983`
`Tmin'`	`0.983`

Correction method= Not given

Data completeness= 0.826 Theta(max)= 25.010

R(reflections)= 0.0500( 1000) wR2(reflections)= 0.1558( 2043)

S = 0.584 Npar= 164

The following ALERTS were generated. Each ALERT has the format
       test-name_ALERT_alert-type_alert-level.
Click on the hyperlinks for more details of the test.
Alert level A
REFLT03_ALERT_3_A  Reflection count < 85% complete (theta max?)
           From the CIF: _diffrn_reflns_theta_max           25.01
           From the CIF: _diffrn_reflns_theta_full          25.01
           From the CIF: _reflns_number_total               2043
           TEST2: Reflns within _diffrn_reflns_theta_max
           Count of symmetry unique reflns         2474
           Completeness (_total/calc)             82.58%
PLAT022_ALERT_3_A Ratio Unique / Expected Reflections too Low ....       0.83      
PLAT029_ALERT_3_A _diffrn_measured_fraction_theta_full Low .......       0.83      
Alert level B
GOODF01_ALERT_2_B  The least squares goodness of fit parameter lies
            outside the range 0.60 <> 4.00
            Goodness of fit given =      0.584
PLAT148_ALERT_3_B su on the      b  - Axis is Too Large (x 1000) .         30 Ang. 
PLAT148_ALERT_3_B su on the      c  - Axis is Too Large (x 1000) .          7 Ang. 
PLAT149_ALERT_3_B su on the   beta   Angle is Too Large (x 100) ..         16 Deg. 
Alert level C
CRYSC01_ALERT_1_C The word below has not been recognised as a standard
            identifier.
            unk
CRYSC01_ALERT_1_C No recognised colour has been given for crystal colour.
PLAT026_ALERT_3_C Ratio Observed / Unique Reflections too Low ....         49 Perc.
PLAT340_ALERT_3_C Low Bond Precision on  C-C Bonds (x 1000) Ang ..          5      
PLAT432_ALERT_2_C Short Inter X...Y Contact  O3     ..  C10     ..       2.98 Ang. 
PLAT194_ALERT_1_C Missing _cell_measurement_reflns_used datum ....          ?
PLAT195_ALERT_1_C Missing _cell_measurement_theta_max   datum ....          ?
PLAT196_ALERT_1_C Missing _cell_measurement_theta_min   datum ....          ?
PLAT790_ALERT_4_C Centre of Gravity not Within Unit Cell: Resd.  #          1      
              C14 H24 O4                                                       
Alert level G
PLAT793_ALERT_4_G The Model has Chirality at C3      (Verify) ....          S      
   3 ALERT level A = In general: serious problem
   4 ALERT level B = Potentially serious problem
   9 ALERT level C = Check and explain
   1 ALERT level G = General alerts; check

   5 ALERT type 1 CIF construction/syntax error, inconsistent or missing data
   2 ALERT type 2 Indicator that the structure model may be wrong or deficient
   8 ALERT type 3 Indicator that the structure quality may be low
   2 ALERT type 4 Improvement, methodology, query or suggestion
   0 ALERT type 5 Informative message, check

Publication of your CIF in IUCr journals

A basic structural check has been run on your CIF. These basic checks will be run on all CIFs submitted for publication in IUCr journals (Acta Crystallographica, Journal of Applied Crystallography, Journal of Synchrotron Radiation); however, if you intend to submit to Acta Crystallographica Section C or E, you should make sure that full publication checks are run on the final version of your CIF prior to submission.

Publication of your CIF in other journals

Please refer to the Notes for Authors of the relevant journal for any special instructions relating to CIF submission.

PLATON version of 13/08/2009; check.def file version of 12/08/2009

Datablock solution - ellipsoid plot

Download CIF editor (publCIF) from the IUCr
Download CIF editor (enCIFer) from the CCDC
Test a new CIF entry